Low-cost, Low-loss, Ultra-wideband Miniaturized Feed for Modern Interferometric Radio Telescopes 后印本

摘要: We have developed, built, and tested a new feed design for interferometric radio telescopes with "large-N, small-D" designs. Those arrays require low-cost and low-complexity feeds for mass production on reasonable timescales and budgets, and also require those feeds to be miniaturized to minimize obstruction of the dishes, along with having ultra wide bands of operation for most current and future science goals. The feed presented in this paper modifies the exponentially tapered slot antenna (Vivaldi) and quad-ridged flared horn antenna designs by having an oversized backshort, a novel method of miniaturization that is well-suited for deeper dishes. It is made of laser cut aluminum and printed circuit boards, such that it is inexpensive ($\lesssim$ 75 USD when purchased in bulk) and quick to build; it has a 5:1 frequency ratio, and its size is approximately a third of its longest operating wavelength. We present the science and engineering constraints that went into design decisions, the development and optimization process, and the simulated performance. We optimized and built a version of this feed design for the Canadian Hydrogen Observatory and Radio-transient Detector (CHORD) prototypes. When simulated on CHORD's very deep dishes (f/D=0.21), with CHORD's custom first stage LNAs, the on-sky system temperature Tsys of the complete receiving system from dish to digitizer remains below 30 K over the 0,3-1.5 GHz band, and maintains an aperture efficiency between 0.4 and 0.6. The feed is designed to slightly under-illuminate the CHORD dishes, in order to minimize coupling between array elements and spillover.